SRM: How to identify that user is connected directly or via gateway server

Resumo: How to identify that User is connected directly or via gateway server? Where to check if the test connection is passed but data is not sent to SRS?

Este artigo aplica-se a Este artigo não se aplica a Este artigo não está vinculado a nenhum produto específico. Nem todas as versões do produto estão identificadas neste artigo.
Confira outros recursos

Instruções

Symptoms & Causes:
With SRM 4.7.1.0 though the test connection is passed, but sometimes the user is still not able to send the data to SRS via gateway server.  The following steps show how to connect directly and how to connect via gateway server.

Resolution
 
  1. There are two ways to connect to SRS from SRM:
    • Direct connect
    • Secure Gateway
  2. Check the Enable Connectivity checkbox which is by default ‘Direct’ connectivity.
  3. Alternatively, to enable Dell Technologies Connectivity via gateway server, do the following:
  1. Check the Connect Via Gateway Server checkbox.
  2. Type the Primary or Secondary Gateway IP address and the Gateway Port to be used.
  1. Have a valid ELMS license installed and enter a Valid Access Key and PIN.
 
  1. If the test connection shows success but still data is not sent to SRS or connectivity issue with the SCG server then please check the logs.
  1. For Linux or vApp the log location is:  <APG_Install_DIR>/APG/ese/var/log/ESE.log
 
  1. For Windows the log location is:  <APG_Install_DIR>\APG\ESE\data\log\ESE.log
Propriedades do artigo
Número do artigo: 000200558
Tipo de artigo: How To
Último modificado: 07 nov. 2022
Versão:  3
Encontre as respostas de outros usuários da Dell para suas perguntas.
Serviços de suporte
Verifique se o dispositivo está coberto pelos serviços de suporte.