TL1000 : How to find the service Tag via the Java Web Interface?

Sammanfattning: This tutorial explains how to find the PowerVault TL1000 Service Tag via the management web interface.

Den här artikeln gäller för Den här artikeln gäller inte för Den här artikeln är inte kopplad till någon specifik produkt. Alla produktversioner identifieras inte i den här artikeln.
Kolla in andra resurser

Symptom

 

SLN303451_en_US__1icon Note: This article is part of the Dell PowerVault knowledge library, available here.

 

Orsak

-

Upplösning

This tutorial explains how to find the PowerVault TL1000 Service Tag via the management web interface. It works only for library where the firmware is in version 0071.3000 or later. If the service tag is not displayed, the solution is to physically check in front of the device.

   

Warning: The Service Tag will be displayed only when Library Firmware is in version 0071.3000 or later. The library serial number is not the Service Tag.

 



SLN303451_en_US__21


 

Prerequisites:


The library management interface IP address has to be reachable.
Java has to be installed on your server.



 

Steps:


Open an internet navigator and connect to the library mangement inteface.
You will receive a default Java welcome message:

SLN303451_en_US__32 - Copy

 
Check  "I accept the risk and want to run this application" , then click on Run

Connect with the administrator credentials, the default password is:

 
Account admin
Password secure


SLN303451_en_US__43 - Copy


On the home page you will find the Service Tag on the right of "Service Tag". The library serial number is not the Service Tag.


  SLN303451_en_US__5service tag tl1000





 

Berörda produkter

PowerVault TL1000
Artikelegenskaper
Artikelnummer: 000140793
Artikeltyp: Solution
Senast ändrad: 07 okt. 2021
Version:  5
Få svar på dina frågor från andra Dell-användare
Supporttjänster
Kontrollera om din enhet omfattas av supporttjänster.