Gå vidare till huvudinnehållet
  • Lägg beställningar snabbt och enkelt
  • Visa beställningar och kontrollera leveransstatus
  • Skapa och kom åt en lista över dina produkter
  • Hantera dina webbplatser, produkter och kontakter på produktnivå från Dell EMC med hjälp av företagsadministration.

OMSA 1.x Processes in Linux 2.1 Advanced Server May Not Shut Down When Switching to Single-User Mode - Product Support Quick Note (PSQN) - 177948

Den här artikeln kan ha översatts automatiskt. Om du har feedback angående kvaliteten kan du meddela oss via formuläret längst ned på den här sidan.

Artikelns innehåll


Symptom

OMSA 1.x processes in Linux may not shut down when switching to single-user mode.

Dell™ OpenManage™ Server Administrator (OMSA) 1.7 and 1.8 may leave processes running after switching to single-user mode specifically on Red Hat Linux 2.1 Advanced Server. The omsad service creates additional threads when started; however, this process may fail to stop when manually stopping the service or when issuing the command init 1 to switch the system into single-user mode. Restarting the system works correctly since all remaining processes are terminated before the system reboots.

NOTE:  Dell Software Engineering plans to address this issue in a future OMSA release.

As a workaround, perform the following step:



Use the "ps -aux" command to list the process ID and "kill" command to stop the service.

List the omsad process ID using the command ps -aux, and use the Linux command kill with the ID to manually stop the omsad service.



Artikelegenskaper


Senaste publiceringsdatum

21 feb. 2021

Version

3

Artikeltyp

Solution