Dell EMC Unity: Fehler beim Aktivieren von Support Assist mit Secure Connection Gateway [vom Nutzer korrigierbar]
摘要: Nach einem Upgrade auf 5.3 kann Support Assist mit SCG (GatewayServer) nicht aktiviert werden.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
Nach einem Upgrade auf 5.3 kann Support Assist mit SCG (GatewayServer) nicht aktiviert werden. Der folgende Fehler wird angezeigt:
Die cemtracer_emcsupport.log zeigt die folgenden Fehler an:
Beim Versuch, ConnectHome manuell zu deaktivieren, wird der folgende Fehler angezeigt:
Es ist keine "von"-E-Mail-Adresse konfiguriert:
Vorgang fehlgeschlagen. Error code:
0x6400bee Der Vorgang konnte nicht durchgeführt werden, weil Connect Home nicht konfiguriert wurde. (Fehlercode: 0x6400bee)
0x6400bee Der Vorgang konnte nicht durchgeführt werden, weil Connect Home nicht konfiguriert wurde. (Fehlercode: 0x6400bee)
Die cemtracer_emcsupport.log zeigt die folgenden Fehler an:
15 Jun 2023 13:16:23 - [EmcSupportServices] ERROR - {0:3108967:253371764}[15936|29716|d63ffb40][ExecuteSvcScript @ ../../../components/providers/osls/EmcSupportServices/src/EMC_UEM_EmcSupportServiceLeaf.cpp:2543] Non OK return code 5 and output from running svc_connectemc --getconfig
15 Jun 2023 13:21:13 - [EmcSupportServices] ERROR - {1:3109257:859694766}[15936|31306|d87ffb40][ExecuteSvcScript @ ../../../components/providers/osls/EmcSupportServices/src/EMC_UEM_EmcSupportServiceLeaf.cpp:2543] Non OK return code 5 and outputINFO [spa]: Verifying peer connectivity ...
from running svc_connectemc --disable --nodbupdate
Beim Versuch, ConnectHome manuell zu deaktivieren, wird der folgende Fehler angezeigt:
svc_connectemc --disable --nodbupdate INFO [spa]: Verifying peer connectivity ... ERROR [spa]: Email (ConnectEMC) not configured.
Es ist keine "von"-E-Mail-Adresse konfiguriert:
uemcli /sys/support/connecthome show -detail Storage system address: 127.0.0.1 Storage system port: 443 HTTPS connection 1: Enabled = yes SMTP server = xxx.xxx.xxx.xxx E-mail from address = (none)@emc.com
原因
Um Support Assist in Version 5.3 zu aktivieren, benötigt connectemc eine Absender-E-Mail-Adresse.
解决方案
Führen Sie die folgenden Schritte aus, um eine Dummy-Absenderadresse einzugeben und support Assist zu konfigurieren:
- Aktuellen SMTP-Server mit "uemcli /sys/support/connecthome show -detail" abrufen
- Konfigurieren Sie ConnectHome mit einem Dummy --sendermail neu:
svc_connectemc --enable --sendermail test@test.com
- Konfigurieren von Support Assist mit SCG
受影响的产品
Dell EMC Unity 300F, Dell EMC Unity 350F, Dell EMC Unity 400, Dell EMC Unity 400F, Dell EMC Unity 450F, Dell EMC Unity 500, Dell EMC Unity 500F, Dell EMC Unity 550F, Dell EMC Unity 600, Dell EMC Unity 600F产品
Dell Unity 300, Dell EMC Unity XT 380, Dell EMC Unity XT 380F, Dell EMC Unity XT 480, Dell EMC Unity XT 480F, Dell EMC Unity 650F, Dell EMC Unity XT 680, Dell EMC Unity XT 680F, Dell EMC Unity XT 880, Dell EMC Unity XT 880F
, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity Hybrid, Dell EMC UnityVSA Professional Edition/Unity Cloud Edition
...
文章属性
文章编号: 000215107
文章类型: Solution
上次修改时间: 29 8月 2023
版本: 3
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。