Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

connect

Table 1. Details of connect. The following table provides the details of connect attribute:
Description	Connects to the switch or server serial console.
Synopsis	`racadm connect [-b] —m <module>` `racadm connect [-b] < server-n >` `racadm connect [-b] < switch-n >`
Input	-b — Connects to the switch or console using the binary mode. This is an optional argument; a server or a switch must be present. NOTE: If you use the -b option, reset the CMC to terminate the connect operation. server-n, where n=1–4 switch-n, where n=1 NOTE: The values 2 and 4 for `n` are valid only for multi-node sleds. `switch-n`: where `n` = 1 to 2 or <a1 \| a2>
Example	Connect to I/O Module 1 serial console racadm connect -m switch-1 Connect to server 1 serial console racadm connect -m server-1