Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

get enclosure

Table 1. Details of get enclosure. The following table provides the details of get enclosure attribute:
Description	Displays the status and attributes of the enclosure. NOTE: To use this subcommand, you must have the CMC Login User privilege.
Synopsis	racadm raid get enclosures -o -p Status racadm raid get enclosures -o
Input	-o — The -o is used to display the fault-tolerant status of a enclosure. -p — The network password of the share.
Example	racadm raid get enclosures -o -p Status Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1 Status = Ok Enclosure.External.0-1:RAID.ChassisSlot.5-1 Status = Ok Enclosure.External.0-0:RAID.ChassisSlot.5-1 Status = Failed racadm raid get enclosures -o Enclosure.Internal.0-0:RAID.ChassisIntegrated.2-1 Status = Ok RollupStatus = Ok Name = VRTX2.5x25 0:0 BayId = 0 FirmwareVersion = 2.00 AssetTag = elan3 AssetName = VRTX200 ternal backplane SasAddress = Not applicable SlotCount = 25 Enclosure.External.0-1:RAID.ChassisSlot.5-1 Status = Ok RollupStatus = Ok Name = MD1220 0:1 EnclosurePosition = 1 ConnectedPort = 0 FirmwareVersion = 1.05 ServiceTag = 6Q2XMQ1 AssetTag = slot 5 1 AssetName = MD1220 RedundantPath = Present SasAddress = Not applicable SlotCount = 24 Enclosure.External.0-0:RAID.ChassisSlot.5-1 Status = Failed RollupStatus = Failed Name = MD1220 0:0 EnclosurePosition = 0 ConnectedPort = 0 FirmwareVersion = 1.05 ServiceTag = BWQPWP1 AssetTag = slot 5 0 AssetName = MD1220 RedundantPath = Present SasAddress = Not applicable SlotCount = 24