Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

Forces the RAID Controller to make the specified drive online. This operation may result in obsolete or corrupted data, and should only be attempted in cases where a rebuild operation has failed or is not applicable.

racadm raid forceonline:<PD FQDD> {current|pending}

• –current <optional>: Performs the configuration right now.
• • NOTE: If this requires the system to reboot, then the system is rebooted.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system reboots.

racadm raid forceonline:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1