Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

iDRAC 8/7 v2.30.30.30 User’s Guide

PDF

Using SOL from PuTTY on Windows

To start IPMI SOL from PuTTY on a Windows management station:
  • NOTE: If required, you can change the default SSH or Telnet time-out at Overview > iDRAC Settings > Network > Services .
  1. Run the command to connect to iDRAC: putty.exe [-ssh | -telnet] <login name>@<iDRAC-ip-address> <port number>
    • NOTE: The port number is optional. It is required only when the port number is reassigned.
  2. Run the command console com2 or connect to start SOL and boot the managed system. A SOL session from the management station to the managed system using the SSH or Telnet protocol is opened. To access the iDRAC command-line console, follow the ESC key sequence. Putty and SOL connection behavior:
    • While accessing the managed system through putty during POST, if the Function keys and keypad option on putty is set to:
      • VT100+ — F2 passes, but F12 cannot pass.
      • ESC[n~ — F12 passes, but F2 cannot pass.
    • In Windows, if the Emergency Management System (EMS) console is opened immediately after a host reboot, the Special Admin Console (SAC) terminal may get corrupted. Quit the SOL session, close the terminal, open another terminal, and start the SOL session using the same command.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\