Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
  • Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

Dell Chassis Management Controller Version 3.10 for Dell EMC PowerEdge VRTX User's Guide

PDF

Configuring Network Share Using CMC Web Interface

To configure or edit the Network Share location or credentials:
  1. In the CMC web interface, in the system tree, go to Server Overview and then click Network Share . The Edit Network Share page is displayed.
    • NOTE: When you have same folder for chassis, server, and boot identity profile, you may see performance issues if there is more than 100 profiles.
  2. In the Network Share Settings section, configure the following settings as required:
    • Protocol
    • IP Address or Host Name
    • Share Name
    • Update folder
    • File Name (optional)
      • NOTE: Entering the File Name is optional only when the default catalog file name is catalog.xml. If the catalog file name is changed, then the new name must be entered in this field.
    • Profile Folder
    • Domain Name
    • User Name
    • Password
    • SMB Version
    • NOTE: The SMB Version option is available only if the Protocol type is CIFS.
    • NOTE: If you are using CIFS that is registered with a domain, and are accessing the CIFS using the IP with the CIFS local user credentials, it is mandatory to enter the hostname or host IP in the Domain Name field.
    For more information, see the CMC Online Help.
  3. Click Test Directory to verify whether the directories are readable and writeable.
  4. Click Test Network Connection to verify if the network share location is accessible. When you apply an SMB version, the existing network share is unmounted and mounted again when click Test Network Connection or navigate to other GUI pages.
  5. Click Apply to apply the changes to the network share properties.
    • NOTE:
    Click Back to return to the Server Component Update page.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\