Dell PowerEdge C4130 Owner's Manual

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

NOTE: This is a Field Replaceable Unit (FRU). Removal and installation procedures should be performed only by Dell certified service technicians.

1. Follow the safety guidelines listed in the Safety instructions section.

1. If applicable, connect the riser cables to the system board/NVLink board.
2. If applicable, install the expansion card.
3. Install the expansion card riser cage.
4. Follow the procedure listed in the After working inside your system section.
5. Install any device drivers required for the expansion card. For more information, see the documentation for the card.