Dell EMC Networking OS Configuration Guide for the S5048F–ON System 9.14.2.4

Enabling and Disabling Privilege Levels

To enable and disable privilege levels, use the following commands.

• Set a user’s security level.
  EXEC Privilege mode
  enable or enable privilege-level
  If you do not enter a privilege level, Dell EMC Networking OS sets it to 15 by default.
• Move to a lower privilege level.
  EXEC Privilege mode
  disable level-number
  • level-number: The level-number you wish to set.
  If you enter disable without a level-number, your security level is 1.