Dell EMC Networking OS Configuration Guide for the S5048F–ON System 9.14.2.4

Splitting 100G Ports

• Split a 100G port into two 50G ports.
  CONFIGURATION Mode
  stack-unit stack-unit-number port number portmode dual speed 50G
  • stack-unit-number: enter the stack member unit identifier on which the port resides.
  • number: enter the port number of the 100G port to be split. The range is from 1 to 32.
• Split a 100G port into four 25G ports.
  CONFIGURATION Mode
  stack-unit stack-unit-number port number portmode quad speed 25G
  • stack-unit-number: enter the stack member unit identifier on which the port resides.
  • number: enter the port number of the 100G port to be split. The range is from 1 to 32.
• Split a 100G port into one 40G ports.
  CONFIGURATION Mode
  stack-unit stack-unit-number port number portmode single speed 40G
  • stack-unit-number: enter the stack member unit identifier on which the port resides.
  • number: enter the port number of the 100G port to be split. The range is from 1 to 32.
• Split a 100G port into four 10G ports.
  CONFIGURATION Mode
  stack-unit stack-unit-number port number portmode quad speed 10G
  • stack-unit-number: enter the stack member unit identifier on which the port resides.
  • number: enter the port number of the 100G port to be split. The range is from 1 to 32.