Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

PDF

getsysinfo

Description

Displays information related to iDRAC, managed system, and watchdog configuration.

  • NOTE: The host name and OS Name fields in the getsysinfo output display accurate information only if the Dell OpenManage Server Administrator is installed on the managed system. Else, these fields may be blank or inaccurate. An exception to this are VMware operating system names, which are displayed even if the Server Administrator is not installed on the managed system.
Synopsis
racadm getsysinfo [-d] [-s] [-w] [-A] [-c] [-4] [-6]
Input
  • —4 — Displays IPv4 settings
  • —6 — Displays IPv6 settings
  • —c — Displays common settings
  • —d — Displays iDRAC information
  • —s — Displays system information
  • —w — Displays watchdog information
  • —A — Eliminates the printing of headers/labels

Output

racadm getsysinfo
                                 RAC Information:
                                 RAC Date/Time           = Tue May 14 14:04:59 2013
                                 Firmware Version        = 1.40.40
                                 Firmware Build          = 13
                                 Last Firmware Update    = 05/10/2013 20:56:10
                                 Hardware Version        = 0.01
                                 MAC Address             = 90:B1:1C:11:3C:B7
                              
                                 Common settings:
                                 Register DNS RAC Name   = 0
                                 DNS RAC Name            = idrac-H1VGF2S
                                 Current DNS Domain      =
                                 Domain Name from DHCP   = Disabled
                              
                                 IPv4 settings:
                                 Enabled                 = 1
                                 Current IP Address      = 192.168.0.1
                                 Current IP Gateway      = 192.168.0.1
                                 Current IP Netmask      = 192.168.0.1
                                 DHCP Enabled            = 1
                                 Current DNS Server 1    = 0.0.0.0
                                 Current DNS Server 2    = 0.0.0.0
                                 DNS Servers from DHCP   = Disabled
                                 
                              
                                 IPv6 settings:
                                 Enabled                 = 0
                                 Current IP Address 1    = ::
                                 Current IP Gateway      = ::
                                 Autoconfig              = 1
                                 Link Local IP Address   = ::
                                 Current IP Address 2    = ::
                                 Current IP Address 3    = ::
                                 Current IP Address 4    = ::
                                 Current IP Address 5    = ::
                                 Current IP Address 6    = ::
                                 Current IP Address 7    = ::
                                 Current IP Address 8    = ::
                                 Current IP Address 9    = ::
                                 Current IP Address 10   = ::
                                 Current IP Address 11   = ::
                                 Current IP Address 12   = ::
                                 Current IP Address 13   = ::
                                 Current IP Address 14   = ::
                                 Current IP Address 15   = ::
                                 DNS Servers from DHCPv6 = Disabled
                                 Current DNS Server 1    = ::
                                 Current DNS Server 2    = ::
                                 
                              
                                 System Information:
                                 System Model            = PowerEdge R520
                                 System Revision         = I
                                 System BIOS Version     = 1.5.0
                                 Service Tag             = H1VGF2S
                                 Express Svc Code        = 37118600020
                                 Host Name               =
                                 OS Name                 =
                                 OS Version              =
                                 Power Status            = ON
                                 Fresh Air Capable       = Yes
                                 
                              
                                 Watchdog Information:
                                 Recovery Action         = None
                                 Present countdown value = 15 seconds
                                 Initial countdown value = 15 seconds
                                 
                              
                                 Embedded NIC MAC Addresses:
                                 NIC.Embedded.1-1-1      Ethernet                = 90:B1:1C:11:3C:B5
                                 WWN                     = 90:B1:1C:11:3C:B5
                                 NIC.Embedded.2-1-1      Ethernet                = 90:B1:1C:11:3C:B6
                                 WWN                     = 90:B1:1C:11:3C:B6
                              
Example
  • Display Chassis Information

    racadm getsysinfo -c
  • Display CMC Information

    racadm getsysinfo -d
  • racadm getsysinfo -A -s

    ""System Information:" "PowerEdge R520" "I" "1.5.0" "H1VGF2S" "37118600020" "" "" "" "ON" "Fresh Air Capable:" "Yes" "Embedded NIC MAC Addresses:" "90:B1:1C:11:3C:B5" "90:B1:1C:11:3C:B5" "90:B1:1C:11:3C:B6" "90:B1:1C:11:3C:B6"

  • racadm getsysinfo -w -s
                                                 System Information:
                                                 System Model            = PowerEdge R520
                                                 System Revision         = I
                                                 System BIOS Version     = 1.5.0
                                                 Service Tag             = H1VGF2S
                                                 Express Svc Code        = 37118600020
                                                 Host Name               =
                                                 OS Name                 =
                                                 OS Version              =
                                                 Power Status            = ON
                                                 Fresh Air Capable       = Yes
                                                 
                                              
                                                 Watchdog Information:
                                                 Recovery Action         = None
                                                 Present countdown value = 15 seconds
                                                 Initial countdown value = 15 seconds
                                                 
                                                 Embedded NIC MAC Addresses:
                                                 NIC.Embedded.1-1-1      Ethernet                = 90:B1:1C:11:3C:B5
                                                 WWN                     = 90:B1:1C:11:3C:B5
                                                 NIC.Embedded.2-1-1      Ethernet                = 90:B1:1C:11:3C:B6
                                                 WWN                     = 90:B1:1C:11:3C:B6
                                              

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\