Zu den Hauptinhalten
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.

Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

PDF

inlettemphistory

Description

Displays the average and the peak temperatures during the last hour, day, week, month, or year. Also Exports the inlet temperature history data file. The file can be exported to a remote file share, local file system, or the management station.

  • NOTE: For FM120x4 systems, this subcommand provides the historical data for system board temperature.
Synopsis
  • racadm inlettemphistory export –f <filename> –t <type> [–u <username of the network share>]  [–p <password for the remote
                                                          share>] [-i <network share location>] 
                                                       
  • racadm inlettemphistory get
Input
  • -f — Exports inlet temperature history filename. The maximum length of this parameter is 64 characters.
    • NOTE: If a file with the specified filename exists, then the older file is replaced with the new history file.
  • -u — User name of the remote share to export the file. Specify user name in a domain as domain or username.
  • -p — Password for the remote share to where the file must be exported.
  • -l — Network share location to where the inlet temperature history must be exported. The maximum length of this parameter is 256 characters.
    • NOTE: Export to an IPv6 NFS share is not supported.
  • -t — Specifies the exported file type. Valid values are xml and csv. These values are case-insensitive.
  • NOTE: From firmware RACADM, only export to a remote share is supported. The behavior of remote share is not defined when the path specified ( -l) contains special characters.
Example
  • Export the log to a remote CIFS share.
    racadm inlettemphistory export -f Mylog.xml -u admin -p mypass -l //1.2.3.4/share -t xml
  • Export the log to local file system using Local RACADM.
    racadm inlettemphistory export -f Mylog.xml -t xml
  • Export the log to management station using Remote RACADM.
    racadm -r 1.2.3.4 -u user -p pass inlettemphistory export -f Mylog.csv -t csv
  • View the inlet temperature history.
    racadm inlettemphistory get 
    Duration Above Warning Threshold as Percentage = 0.0%
                                                          Duration Above Critical Threshold as Percentage = 0.0%
                                                          
                                                          Average Temperatures
                                                          Last Hour  = 23C ( 73.4F )
                                                          Last Day   = 24C ( 75.2F )
                                                          Last Week  = 24C ( 77.0F )
                                                          Last Month = 25C ( 77.0F )
                                                          Last Year  = 23C ( 73.4F )
                                                          
                                                          Peak Temperatures
                                                          Last Hour  = 23C ( 73.4F ) [At Wed, 30 May 2012 11:00:57]
                                                          Last Day   = 25C ( 77.0F ) [At Tue, 29 May 2012 15:37:23]
                                                          Last Week  = 27C ( 80.6F ) [At Fri, 25 May 2012 10:38:20]
                                                          Last Month = 29C ( 84.2F ) [At Wed, 16 May 2012 15:34:13]
                                                          Last Year  = 29C ( 84.2F ) [At Wed, 16 May 2012 15:34:13]
                                                          
                                                       

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\