Zu den Hauptinhalten
Abmelden

Willkommen bei Dell

Mein Konto
  • Bestellungen schnell und einfach aufgeben
  • Bestellungen anzeigen und den Versandstatus verfolgen
  • Profitieren Sie von exklusiven Prämien und Rabatten für Mitglieder
  • Erstellen Sie eine Liste Ihrer Produkte, auf die Sie jederzeit zugreifen können.
  • Verwalten Sie mit der Unternehmensverwaltung Ihre Dell EMC Seiten, Produkte und produktspezifischen Kontakte.
Anmelden Konto erstellen Premier-Anmeldung Anmeldung beim Partnerprogramm
Kontakt

Ihr Warenkorb bei Dell.com

Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

PDF

set

Description Modifies the value of configuration objects on a device.
  • NOTE:
    • For configuration of staged objects such as BIOS or NIC, commit and reboot job creation must be used to apply the pending values. For more information, see jobqueue.
    • To run this subcommand for configuration xml file type, the Lifecycle Contoller version 1.1 or later is required.
Synopsis 
  • racadm set -f <filename> [--continue]
  • racadm set <FQDD Alias>.<group>.<index>.<object> <value>
  • racadm set <FQDD Alias>.<group>.<object> <value>
  • racadm set <FQDD Alias>.<group>.<index>.<object> <value>
  • racadm set -f <filename> -t xml -u myuser -p mypass -l <CIFS or NFS share>
  • racadm set –f <filename> -t <filetype> -u <username> -p <password> -l <CIFS or NFS share> --preview 
  • racadm set -f <filename> -t <filetype> -u <username> -p <password> -l <CIFS or NFS share> -c <FQDD>
  • racadm set -f <filename> -t <filetype> -u <username> -p <password> -l <CIFS or NFS share> -c <FQDD>, <FQDD>, <FQDD>, <FQDD>
Input
  • <FQDD Alias>
  • <group> — Specifies the group containing the object that must be written.
  • <object> — Specifies the object name of the value that must be written.
  • <index> — This option is specified where FQDD Aliases or Groups must be indexed.
  • -f <filename> — Enables set to configure the device from a specified file. This option is not supported in the Firmware RACADM interface.
  • --continue — This option is used with –f only. If configuration through file is unsuccessful for a group, then configuration continues with the next group in the file. If this option is not used, then configuration stops when it is unsuccessful for a particular group. After the unsuccessful group, the rest of the groups are not configured.
  • -u — Specifies user name of the remote share from where the file must be imported.
  • -p — Specifies password for the remote share from where the file must be imported.
  • -l — Specifies network share location from where the file must be imported.
  • -t — Specifies the file type that must be imported. Valid values are xml and ini. These values are case-insensitive. ini imports the legacy configuration file. The ini file cannot be imported from a remote share. If -t is not specified, the ini file format (default) is imported.
    • NOTE: To import or export .xml config files, Lifecycle Controller version 1.1 or later is required.
  • -b — Specifies the type of shutdown for the host after the import operation completes. The parameters are Graceful for graceful and Forced for forced shutdown. If this parameter is not specified, graceful shutdown is taken as the default.
    • NOTE: If the operating system is in use, then the graceful shutdown option may time out within 300 seconds. If this operation is unsuccessful, then retry with the force option.
  • -w — Maximum time to wait for the graceful shutdown to occur. The value must be entered in seconds. Minimum accepted value is 300 seconds and the maximum accepted value is 3600 seconds. The default value is 1800 seconds.
  • -s — Power state of the host when the import operation completes. The parameters are "On" for powered ON and "Off" for powered OFF. If this parameter is not specified, power ON is taken as default.
  • --preview — Validate the configuration .xml file and view the status.

    The --preview option includes the Job ID that is used to verify the status of the file configuration before applying. The Job ID can be tracked by running the racadm jobqueue view –I <JID> command.

    • NOTE:
      • This option does not restart the system.
      • The -b, -w options cannot be included with the --preview option.
      • A scheduled job or pending configuration should not be running while using the --preview option.
  • -c — Specifies the FQDD or list of FQDDs separated by ',' of the components for which the configurations should be imported. If this option is not specified, configuration related to all the components are imported.
  • NOTE:

    To use the -c or --preview option, the minimum Lifecycle Controller version required is 1.2.

Example
  • Configure the iDRAC using a file. 
    $ racadm set -f myrac.cfg
  • Configure LCD String. 
    $ racadm set system.lcd.LCDUserString test
  • Configure rack name for server. 
    $ racadm set system.location.rack.name rack1
  • Configure a RAC from an XML configuration file at a remote CIFS share. 
    $ racadm set -f myfile.xml -t xml -u myuser -p mypass -l //10.1.2.3/myshare
  • Configure a RAC from an XML configuration file at a remote NFS share. 
    $ racadm set -f myfile.xml -t xml -l 10.1.2.3:/myshare
  • Configure a RAC from an .xml file, with a wait time of 10 minutes, shutdown type graceful and end host type power on. 
    $ racadm set -f myfile.xml -t xml -b "graceful" -w 600 -s "on"
  • Verify the .xml file content located in a remote share. 
    racadm set -f temp_Configuration_file -t xml -u Administrator -p dell_123 -l //10.94.162.74/xyz --preview
  • Import the xml configuration of the iDRAC component to a CIFS share 
    racadm set -f file -t xml -u myuser -p mypass -l //10.1.12.13/share -c iDRAC.Embedded.1

Diesen Inhalt bewerten

Präzise
Nützlich
Leicht verständlich
War dieser Artikel hilfreich?
0/3000 characters
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie eine Bewertung ab (1 bis 5 Sterne).
  Bitte geben Sie an, ob der Artikel hilfreich war.
  Die folgenden Sonderzeichen dürfen in Kommentaren nicht verwendet werden: <>()\