Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

Using The Autocomplete Feature

Use the autocomplete feature to:

Display all the available RACADM commands in the alphabetical order on pressing the < Tab> key at the prompt.
View the complete list, enter the starting letter of the command at the prompt and press < Tab> key.
Navigate the cursor within a command, press:

< Home> key: directs to the beginning of the command.

< End > key: directs to the end of the command.
View the history of the commands that were run in the current session, press up and down arrow key.
Exit the Autocomplete mode, enter Quit, Exit, or press < Ctrl+D> key.

For example:

Example 1: racadm> <press tab>

arp
                                       autoupdatescheduler
                                       clearasrscreen
                                       clearpending
                                       closessn
                                       clrraclog
                                       .
                                       .
                                       .
                                       .
                                       .
                                       .
                                       .
                                       vflashsd
                                       vflashpartition
                                       vmdisconnect
                                       cd
                                       quit

Example 2: racadm> get <press tab>

get
                                       getconfig
                                       getled
                                       getniccfg
                                       getraclog
                                       getractime
                                       getsel
                                       getsensorinfo
                                       getssninfo
                                       getsvctag
                                       getsysinfo
                                       gettracelog
                                       getversion

Example 3:

racadm> getl<press tab>

racadm> getled <press enter> or <racadm getled>
                                       LEDState: Not-Blinking

Willkommen

Willkommen bei Dell

Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

Using The Autocomplete Feature

Diesen Inhalt bewerten