Integrated Dell Remote Access Controller 8 (iDRAC8) Version 2.00.00.00 RACADM Command Line Interface Reference Guide

vflashsd

Description	Allows you to initialize or get the status of the vFlash SD card. The initialize operation removes all the existing partitions and resets the card. The status operation displays the status of the last operation performed on the card. To run this subcommand, you must have the Access Virtual Media privilege. NOTE: After you restart the iDRAC, the status of the previous initialize operation is erased.
Synopsis	`racadm vflashsd initialize` `racadm vflashsd status`
Input	`Initialize`— performs initialize operation on SD card. `Status` — indicates to view the progress or status report of the initialize operation.
Output	If initialization is in progress, the message `Initialization of the vFlash SD Card is now in progress` is displayed. If unsuccessful, appropriate error message is displayed. If the status of the last operation performed is successful, the message `LastAction Progress Status==========================================================Initialize SD Card 100 % Complete` is displayed. If unsuccessful, appropriate error message is displayed.