Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Latitude 7490 Owner's Manual

Removing camera-microphone module

The removal procedure of the microphone camera module is only for a nontouch display configuration.
  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.
  3. Disconnect the battery cable from the connector on the system board.
  4. Remove the WLAN card.
  5. Remove the WWAN card.
  6. Remove the display assembly.
  7. Remove the bezel.
  8. Remove the display hinge.
  9. To remove the camera microphone module:
    1. Lift the plastic bracket to disconnect the FPC from the camera microphone module [1].
    2. Using a plastic scribe, pry up the camera module from the top side of the compartment on the display back cover [2].
    3. Remove the camera module.
      Removing camera
  10. To remove the camera microphone module:
    1. Peel off the two pieces of conductive tape covering the camera microphone module [1].
      NOTE The conductive tape is a separate part from the camera module that must be removed and then reattached when replacing the camera microphone module.
    2. Lift the camera microphone module [2].
    3. Disconnect the camera FPC from the camera module [3].
    4. Lift and remove the camera microphone module [4].
      Removing camera

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\