Latitude 7490 Owner's Manual

Removing speaker module

1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. To release the speaker module:
   1. Disconnect the speaker cable from the connector on the system board [1].
      NOTE Use a plastic scribe to release the cable from the connector. Do not pull the cable as it may result in breakage
   2. Un-route the speaker cable from the two routing clips on the side of touchpad buttons [2].
   3. Remove the tape that secures the speaker cables to the touchpad board [3].
   
5. Lift the speaker module from the computer.