Latitude 7490 Owner's Manual

Removing smart card cage

1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the PCIe SSD card.
5. To disconnect the smart card cable:
   1. Disconnect the smart card cable [1].
   2. Lift the smart card cable that is affixed to the touchpad module [2].
   
6. To remove the smart card cage:
   NOTE To identify the number of screws, see screw list
   1. Remove the two (M2.0 x 3.0) screws that secure the smart card cage to the system [1].
   2. Slide and lift the smart card cage from the system [2].