Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell PowerEdge FN I/O Module Configuration Guide 9.10(0.0)

PDF

Redistributing Routes

You can add routes from other routing instances or protocols to the OSPF process.

With the redistribute command, you can include RIP, static, or directly connected routes in the OSPF process.
  • NOTE: Do not route iBGP routes to OSPF unless there are route-maps associated with the OSPF redistribution.

To redistribute routes, use the following command.

Specify which routes are redistributed into OSPF process. CONFIG-ROUTEROSPF-id mode redistribute {bgp | connected | rip | ospf <process id> | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] Configure the following required and optional parameters:
  • bgp, connected, ospf, rip, static: enter one of the keywords to redistribute those routes.
  • metric metric-value : the range is from 0 to 4294967295.
  • metric-type metric-type : 1 for OSPF external route type 1. 2 for OSPF external route type 2.
  • route-map map-name : enter a name of a configured route map.
  • tag tag-value : the range is from 0 to 4294967295.

Example of Viewing OSPF Configuration after Redistributing Routes

To view the current OSPF configuration, use the show running-config ospf command in EXEC mode or the show config command in ROUTER OSPF mode. 
Dell(conf-router_ospf)#show config
                                 !
                                 router ospf 34
                                 network 10.1.2.32 0.0.0.255 area 2.2.2.2
                                 network 10.1.3.24 0.0.0.255 area 3.3.3.3
                                 distribute-list dilling in
                                 Dell(conf-router_ospf)#

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\