Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Deletes the specified virtual drive.

racadm raid deletevd:<VD FQDD> {-current|-pending}

• –current <optional>: Performs the configuration right now.
  NOTE If this requires the system to reboot, it will reboot.

• –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system reboots.

racadm raid deletevd:Disk.Virtual.0:RAID.ChassisIntegrated.1-1