Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Starts a rebuild on a specified virtual drive.

racadm raid rebuild:<PQ FQDD> {-current | -pending}

• –current <optional>: Performs the configuration.
  NOTE If this requires the system to restart, the system is restarted.
• –pending: Save the configuration change for a later use. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system restarts.

racadm raid rebuild:Disk.Bay.0:Enclosure.Internal.0-0:RAID.ChassisIntegrated.1-1