Dell Chassis Management Controller Version 3.0 for PowerEdge VRTX RACADM CLI Guide

Starts an initialization operation on the specified virtual drive.

racadm raid init:<VD FQDD> -speed {fast | full} {-current | -pending}

• –current <optional>: Performs the configuration right now.
  NOTE If this requires the system to reboot it will reboot then.
• –pending: Save the configuration change for a later application. You can use a combination of the –pending and –current flags on multiple commands to reduce the possible number of system reboots.
• –speed{fast | full}: Perform a fast or full (slow) initialization on the virtual drive.

racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed fast
racadm raid init:Disk.Virtual.0:RAID.ChassisIntegrated.1-1 -speed full