Removing the 3.5-inch hard drive
About this task
The following images indicate the location of the 3.5-inch hard-drive assembly and provides a visual representation of the removal procedure.
Steps
- Lay the computer on the right side.
- Remove the screw (#6-32) that secures the 3.5-inch hard-drive assembly to the chassis.
- Lift the hard-drive assembly away from the chassis.
- Remove the cables from the routing guides on the hard-drive assembly.
- Disconnect the data and power cables from
the hard drive.
- Lift the hard-drive assembly away from the chassis.
- Remove the four screws (#6-32) that secure the the hard drive to the hard-drive cage.
- Slide the hard drive from the hard-drive cage.
Data is not available for the Topic