Removing WLAN
card
Steps
- Follow the procedure in Before working inside
your computer.
- Remove the:
- cover
- bezel
- Open the front panel door.
- To remove the WLAN module:
- Loosen
the antenna screw to remove the antenna from the computer.
- Disconnect
the WLAN module cable from the connector on the system board [1]
- Pull the release latch to unlock the WLAN module [2].
- Lift the WLAN module out of the computer.
- To remove the
WLAN card:
- Remove
the screw that secures the WLAN card to the WLAN module [1].
- Lift the
WLAN card bracket [2].
- Disconnect
the antenna cables from the connectors on the WLAN card [3]
- Pull the
WLAN card from the slot [4].
Data is not available for the Topic