Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

OptiPlex 3050 Small Form Factor Owner's Manual

PDF

M.2 Intel Optane Memory Module 16 GB

  1. Follow the procedure in Before working inside your computer.
  2. Remove the cover.
  3. To remove M.2 Intel optane memory module:
    1. Remove the thermal pad and white adhesive tape from the box.
      Image shows removal of the thermal pad and white adhesive tape from the box.
    2. Place the thermal pad on the SSD slot and remove the white adhesive tape.
      Image shows the placement of the thermal pad on the SSD slotImage shows removal of the white adhesive tape.
    3. Place the M.2 Intel optane memory module into the slot on the thermal pad.
      Image shows placement of the M.2 Intel optane memory module into the slot on the thermal pad.
    4. If the system is shipped with screw tighten that secures the M.2 Intel optane memory module on the computer. If the system is shipped with self locking spacer press to lock the M.2 Intel optane to secure on the computer.
      Figure shows how to tighten the screw that secures the M.2 Intel Optane memory module on the computer
  4. To remove the expansion card:
    1. Pull the release tab at the base of the expansion card [1].
    2. Disconnect and lift the expansion card away from the connector [2].
    Figure shows how to remove the expansion card from the computer.
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\