OptiPlex 3050 Small Form Factor Owner's Manual

Product specifications

Table 1. Product specificationsThe table describes the specifications of M.2 Intel Optane memory module
Features	Specification
Capacities	16 GB, 32 GB
Expansion cards	PCIe 3.0 x 2
M.2 form factors (all densities)	2280–S3–B-M
Performace	Seq R/W: Up to 1350/290 MS/s QD4 4HB Random Read: 240K + IOPs QD4 4HB Random Write: 240K + IOPs
Latency (average sequential)	Read 8.25 µ Write: 30 µ
Components	Intel 3D XPoint Memory Media Intel Controller and Firmware PCIe 3.0x2 with NVMe Interface Intel Rapid Storage Technology 15.2 or later
Operating System Support	Windows 10 64 bit
Supported Platforms	7th generation or newer Intel Core processor based platforms
Power	3.3V Supply Rail Active: 3.5 W Drive Idel :900mW to 1.2W
Compliance	NVMe Express 1.1 PCI Express Base specifiation rev 3.0 PCI M.2 HS Spec
Certification and Declarationsµ	UL, CE, C-Tick, BSMI, KCC, Microsoft WHQL, Microsoft WHCK, VCCI
Endurance Rating	100 GB Writes per day Upto 182.3 TBW (Terabytes written)
Temperature Specification	Operating: 0 to 70º C Non-Opearting: 10 to 85º C Temperature monitoring
Shock	1500 G/0.5msec
Vibration	Operating: 2.17 G_RMs(5–800Hz) Non-Operating: 3.13 G_RMS (5–800Hz)
Altitude (Simulated)	Operating: –1,000 ft to 10,000 ft Non-Operating: –1,000 ft to 40,000 ft
Product Ecological Compliance	RoHS
Reliability	Uncorrectable Bit Error Rate (UBER): 1 sector per 10¹⁵ bits read Mean Time Between Failure (MTBF): 1.6 million hours