Removing power
supply unit or PSU
NOTE:Depending on the configuration you order, you
may see either of the heat sinks as shown in the
image below.
- Follow the procedure in Before working inside
your computer.
- Remove the:
- cover
- bezel
- hard drive and optical drive module
- To release the PSU:
- Disconnect the power cable from the system
board [1] [2].
- Unroute the power cables from the retention
clips on the chassis [3] [4].
- To remove the PSU:
- Disconnect the power cable from the system
board [1] [2].
- Lift the cables away from the computer
[3].
- Remove the screws that secure the PSU to
the computer [4].
- Press the blue release tab [1], slide the PSU
and lift it away from the computer [2].
Data is not available for the Topic