Removing 3.5–inch hard drive assembly
- Follow the procedure in Before working inside
your computer.
- Remove the:
- Side Cover
- Front bezel
- To remove hard drive assembly:
- Disconnect the hard drive assembly cables from the connectors on the hard drive.
NOTE: Un-route the cables from the clips from the drive cage.
- Open the front panel door.
- Remove the HDD filler bracket.
- Press the blue tab [1] and pull the hard drive assembly out of the computer [2].
NOTE:The tab may indicate 5.25 inch because you can also install a 5.25 inch hard drive in same drive bay.
Data is not available for the Topic