Removing power supply unit – PSU
- Follow the procedure in Before working inside
your computer.
- Remove the:
- Side Cover
- Front bezel
- Open the Front panel door.
- To release the PSU:
- Disconnect the PSU cables from the connectors on the system board [1, 2].
- Pull the clips to release the cables from the cable holders [3].
- Un-route the PSU cables from the cable holders [4].
- Remove the screws( 6+/-1) that secure the PSU to the computer [5].
- To remove the PSU:
- Press the release tab [1].
NOTE:Release tab is at the base of the PSU
- Slide and lift the PSU away from the computer [2].
Data is not available for the Topic