Removing the system board
- Follow the procedure in Before working inside
your computer.
- Remove the:
- Side Cover
- Front bezel
- Open the front panel door.
- Remove the:
- Heat sink assembly
- Processor
- Expansion card
- Optional M.2 PCIe SSD card
- SD card reader
- Memory module
- Disconnect the optical drive and hard drive cables [1,2] from the connectors on the system board.
- Disconnect the following cables from the system board:
- PSU [1]
- power switch [2]
- speaker [3]
- PSU [4]
- power distribution for optical drive and hard drive [5]
- system fan [6]
- intrusion switch [7]
- To remove the system board:
- Remove the screws (6+/-1) that secure the system board to the computer
- Slide and lift the system board away from the computer [2].
Data is not available for the Topic