Installing power
supply unit or PSU
- Insert the PSU into the PSU slot and slide
it toward the back of the computer until it clicks into place{1,2]
- Tighten the screws (3) to secure the PSU to the
computer chassis [3].
- Route the PSU cables through the retention
clips [2,3,4,5].
- Connect the PSU cables to the connectors on
the system board [1,6].
- Close the front panel
door.
- Install the:
- front bezel
- side cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic