Installing system
fan
- Align the grooves of the system fan with the grommets on the chassis
wall [1].
- Pass the grommets through the corresponding
grooves on the system fan.
- Stretch the grommets and slide the system
fan toward the computer until it locks into place [2].
NOTE Install the lower two grommets first.
- Connect the system fan cable to the connector
on the system board [3].
- Close the front panel
door.
- Install the:
- intrusion switch
- front bezel
- side cover
- Follow the procedure in After working inside
your computer.
Data is not available for the Topic