Removing system
board
- Follow the procedure in Before working inside
your computer.
- Remove the:
- side cover
- front bezel
- Open the front panel door.
- Remove the:
- heat sink fan
- heat sink
- processor
- expansion card
- M.2 PCle SSD
- SD card reader
- memory module
- Disconnect the following cables from the system
board:
- PSU [1]
- power cable and SATA cable [2]
- speaker [3]
- PSU [4]
- power distribution for optical drive and
hard drive [5]
- To remove the system board:
- Remove the screws (8) that secure the system
board to the computer chassis.
- Slide and lift the system board away from
the computer [1, 2].
Data is not available for the Topic