Removing 3.5–inch
hard drive from the hard drive bracket
- Follow the procedure in Before working inside
your computer.
- Remove the:
- side cover
- front bezel
- 3.5-inch hard drive assembly
- To remove the hard drive bracket:
- Pull one side of the hard drive bracket
to disengage the pins on the bracket from the slots on the hard drive
[1].
NOTE Do not pull plastic tab by more than 25° to avoid damage to the tabs.
- Pull the hard drive out of the hard drive
bracket.
- Lift the hard drive out of the hard drive bracket [2].
Data is not available for the Topic