Precision 5560 Service Manual

1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
3. Remove the battery.
4. Remove the speakers.
5. Remove the memory.
6. Remove the solid state drive1.
7. Remove the solid state drive2.
8. Remove the heat sink.
   NOTE:The system board can be removed or installed together with the heat sink attached. This simplifies the procedure and avoids breaking the thermal bond between the system board and the heat sink.
9. Remove the left fan.
10. Remove the right fan.
11. Remove the I/O board.
12. Remove the display assembly.
13. Remove the system board.

The following image indicates the palm-rest and keyboard assembly and provides a visual representation of the removal procedure.

After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly.