THINOSX-4119
|
Session audio may be stop working when using an analog headset on Wyse 3040 thin clients.
|
There is no workaround in this release.
|
THINOSX-3921
|
A delay or lag may be noticed when using a Bluetooth mouse.
|
There is no workaround in this release.
|
THINOSX-5214
|
Bluetooth devices randomly stop functioning after exiting sleep mode.
|
There is no workaround in this release.
|
THINOSX-5415
|
Smartcards with multiple certificates may not function with Single Sign-On.
|
Use a single certificate.
|
THINOSX-5399
|
Wireless warning messages may be incorrectly displayed when using EAP-PEAP without a root certificate.
|
Check the event log.
|
THINOSX-4265
|
Random wireless disconnects are observed on Wyse 3040 thin clients with 802.11r/k enabled.
|
Disable 802.11r/k in Access Point.
|
THINOSX-3602
|
The Fatal Citrix gateway protocol error message may be observed during wireless roaming.
|
Reconnect the session.
|
THINOSX-5411
|
Cisco JVDI video graphic is not closed after you end the call.
|
There is no workaround in this release.
|
THINOSX-5410
|
Cisco JVDI call buttons display may be black or unclear.
|
There is no workaround in this release.
|
THINOSX-4926
|
When using the Citrix browser content redirection (BCR), the mouse right-click function may not work.
|
There is no workaround in this release.
|
THINOSX-5216
|
Citrix multimedia keys (fn+F10/F11/F12) may not function in a Windows 10 session.
|
This is a Citrix known issue.
|
THINOSX-5509
|
The
el.select.placeholder option may be displayed in the Display Resolution list.
|
Click to expand the
Display Resolution drop-down list and select your resolution.
|
THINOSX-4874
|
Multiple seamless applications may fail to reconnect under certain conditions.
|
There is no workaround in this release.
|
THINOSX-2322
|
Published Applications or Desktops may flicker when you move or drag objects on the desktop.
|
This is a Citrix known issue.
|
THINOSX-3305
|
Maximize session from the taskbar does not function when using seamless applications.
|
There is no workaround in this release.
|
THINOSX-3906
|
G key reset and V key video reset functions are not supported.
|
There is no workaround in this release.
|
THINOSX-4255
|
Issues may be observed when you try to wake displays from hibernation on Wyse 3040 thin clients.
|
There is no workaround in this release.
|
THINOSX-3238
|
Performance is slow when moving session objects on a Wyse 3040 thin client that is connected to a display with 4K resolution.
|
There is no workaround in this release.
|
THINOSX-5494
|
On Wyse 5070 Extended thin client, the session desktop supports up to four displays with 4K resolution.
|
There is no workaround in this release.
|
THINOSX-5555
|
Wired EAP-LEAP authentication may fail after one minute.
|
Use other EAP types such as EAP-PEAP, EAP-FAST, and EAP-TLS.
|
THINOSX-5527
|
PEAP-GTC and FAST-GTC do no prompt for credentials after entering an incorrect value.
|
Connect the network cable again.
|
THINOSX-4491
|
SFP module may not function after you resume from sleep mode. You cannot use the Wake-on-LAN feature.
|
Restart the thin client or wake up the device using the integrated RJ45.
|
THINOSX-4407
|
IPv4 session connections may fail if both IPv4 and IPv6 are enabled.
|
Enable both IPv4 and IPv6 on the ThinOS client.
|
THINOSX-5065
|
On some devices, it may take several minutes to display the subsequent pages after the Welcome screen is displayed during the initial boot.
|
Wait for the next page to be displayed as this process may take several minutes.
|
THINOSX-5518
|
Changing client time may take up to one minute to synchronize to the ThinOS desktop.
|
There is no workaround in this release.
|
THINOSX-3641
|
Extract and Restore CMOS options in the Troubleshooting window cannot be used.
|
There is no workaround in this release.
|
THINOSX-3475
|
Incorrect values are displayed in the Inbound and Outbound packet information on the System Information wireless tab.
|
There is no workaround in this release.
|
THINOSX-5454
|
Desktop settings may require a client reboot to activate.
|
There is no workaround in this release.
|
THINOSX-5308
|
The power button is disabled when using the First Boot Wizard.
|
There is no workaround in this release.
|
THINOSX-5143
|
On Wyse 5070 extended client, video issue is observed when you use 5120 x 1440 resolution.
|
There is no workaround in this release.
|
THINOSX-3742
|
The analog audio jacks on the Dell Docking Station WD19 may not function under certain conditions.
|
Use a USB headset.
|
THINOSX-3914
|
Wake-On-LAN or USB may not function when you use the Dell Docking Station WD19.
|
Wake up the device using the integrated USB or RJ45.
|
THINOSX-4389
|
Some configuration menu objects are displayed only in English and not in other languages.
|
There is no workaround in this release.
|
THINOSX-5616
|
If the privilege level is set to
None, you cannot disable the system settings.
|
There is no workaround in this release.
|
THINOSX-5689
|
Sometimes you cannot sign on to the Citrix broker again after re-plugging the smart card. This issue is observed when you sign off the broker by plugging out the smart card, and sign on again by re-plugging the smart card.
|
Press the Esc key to reinitialize the Citrix broker and enter PIN to sign on again.
|
L10N-19900
|
All the browse buttons in the Admin Policy tool that is used to upload file to the device are not working.
|
There is no workaround in this release.
|