Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

PDF

get controllers

Table 1. Details of get controllers. The following table provides the details of get controllers attribute:
Description	The command lists all RAID controllers detected in the system and their properties. NOTE: To use this subcommand, you must have the CMC Login User privilege.
Synopsis	raid get controllers -o
Input	-o — The -o is used to display the fault-tolerant status of a RAID controller.
Example	Sample output of a CMC in which either fault-tolerant mode is not available or is not enabled. RAID.ChassisIntegrated.1-1 Status = Ok RollupStatus = Ok Name = Shared PERC8 (Embedded) FirmwareVersion = 23.8.3-0027 DriverVersion = 06.802.11.00 RebuildRate = 30 % BgiRate = 35 % CheckConsistencyRate = 40 % ReconstructRate = 30 % PatrolReadRate = 30 % PatrolReadMode = Manual PatrolReadState = Stopped CheckConsistencyMode = Stop On Error LoadBalanceSetting = Disabled CopybackMode = OFF PreservedCache = Not Present CacheMemorySize = 1024 MB PersistHotspare = Disabled SpindownUnconfiguredDrives = Disabled SpindownHotspare = Disabled Timeintervalforspindown = 30 (Minutes) SecurityStatus = Unknown EncryptionMode = None SasAddress = 0x590B11C02620E600 PciDeviceId = 0x2f PciSubdeviceId = 0x1f3e PciVendorId = 0x1000 PciSubvendorId = 0x1028 PciBus = 0x0 PciDevice = 0x0 PciFunction = 0x0 BusWidth = Unknown SlotLength = Short SlotType = Unknown CapableSpeeds = 6.0 Gb/s, 3.0 Gb/s LearnMode = Not supported HighAvailabilityMode = None PeerController = N/A Sample output of a CMC in which you have firmware support for the fault-tolerant mode and the hardware, and fault-tolerant mode is active. RAID.ChassisIntegrated.1-1 Status = Ok RollupStatus = Ok Name = Shared PERC8 (Embedded) FirmwareVersion = 23.8.3-0027 DriverVersion = 06.802.11.00 RebuildRate = 30 % BgiRate = 35 % CheckConsistencyRate = 40 % ReconstructRate = 30 % PatrolReadRate = 30 % PatrolReadMode = Manual PatrolReadState = Stopped CheckConsistencyMode = Stop On Error LoadBalanceSetting = Disabled CopybackMode = OFF PreservedCache = Not Present CacheMemorySize = 1024 MB PersistHotspare = Disabled SpindownUnconfiguredDrives = Disabled SpindownHotspare = Disabled Timeintervalforspindown = 30 (Minutes) SecurityStatus = Unknown EncryptionMode = None SasAddress = 0x590B11C02620E600 PciDeviceId = 0x2f PciSubdeviceId = 0x1f3e PciVendorId = 0x1000 PciSubvendorId = 0x1028 PciBus = 0x0 PciDevice = 0x0 PciFunction = 0x0 BusWidth = Unknown SlotLength = Short SlotType = Unknown CapableSpeeds = 6.0 Gb/s, 3.0 Gb/s LearnMode = Not supported HighAvailabilityMode = Fault Tolerant(Active/Passive) PeerController = RAID.ChassisIntegrated.2-1 RAID.ChassisIntegrated.2-1 Status = Ok RollupStatus = Ok Name = Shared PERC8 (Embedded) FirmwareVersion = 23.8.3-0027 DriverVersion = 06.802.11.00 RebuildRate = 30 % BgiRate = 35 % CheckConsistencyRate = 40 % ReconstructRate = 30 % PatrolReadRate = 30 % PatrolReadMode = Manual PatrolReadState = Stopped CheckConsistencyMode = Stop On Error LoadBalanceSetting = Disabled CopybackMode = OFF PreservedCache = Not Present CacheMemorySize = 1024 MB PersistHotspare = Disabled SpindownUnconfiguredDrives = Disabled SpindownHotspare = Disabled Timeintervalforspindown = 30 (Minutes) SecurityStatus = Unknown EncryptionMode = None SasAddress = 0x590B11C02620E600 PciDeviceId = 0x2f PciSubdeviceId = 0x1f3e PciVendorId = 0x1000 PciSubvendorId = 0x1028 PciBus = 0x0 PciDevice = 0x0 PciFunction = 0x0 BusWidth = Unknown SlotLength = Short SlotType = Unknown CapableSpeeds = 6.0 Gb/s, 3.0 Gb/s LearnMode = Not supported HighAvailabilityMode = Fault Tolerant(Active/Passive) PeerController = RAID.ChassisIntegrated.1-1