Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

PDF

setpciecfg

Table 1. Details of setpciecfg. The following table provides the details of setpciecfg attribute:
Description	You can configure PCIe slots and Virtual Adapters, and also set the ride-through properties. NOTE: To use this subcommand, you must have Chassis Administrator privilege. NOTE: The slot assignment feature is licensed.
Synopsis	racadm setpciecfg assign [-c < FQDD>] [-i < server slot>] racadm setpciecfg unassign [-c < FQDD>] racadm setpciecfg ridethru -e racadm setpciecfg ridethru -d racadm setpciecfg ridethru -t <time out value>
Input	-c — Use this option to specify a PCIe adapter or Virtual Adapter. -i — Use this option to specify the server or module slot number. FQDD — FQDD of the specified PCIe slot or Virtual Adapter. -e — Use this option to enable the ride-through mode. -d — Use this option to disable the ride-through mode. -t — Use this option to set the time-out property of a ride-through mode in seconds (0, 60–1800; 0=infinite).
Example	Assign a PCIe slot to a server: racadm setpciecfg assign -c PCIE.ChassisSlot.5 -i 2 Assign the Virtual Adapter to a server: racadm setpciecfg assign -c RAID.ChassisIntegrated.1-1-2 -i 3 Unassign a PCIe slot: racadm setpciecfg unassign -c PCIE.ChassisSlot.3 Unassign a Virtual Adapter: racadm setpciecfg unassign -c RAID.ChassisIntegrated.1-1-3 Enable ride-through mode racadm setpciecfg ridethru -e IOV000: Successfully completed the operation. Disable ride-through mode racadm setpciecfg ridethru -d IOV000: Successfully completed the operation. Set the ride-through time out value in seconds (0, 60–1800; 0 = infinite) racadm setpciecfg ridethru -t 300 IOV000: Successfully completed the operation.