Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Chassis Management Controller Version 3.10 for PowerEdge VRTX RACADM CLI Guide

PDF

get fans

Table 1. Details of get fans. The following table provides the details of get fans attribute:

Description

Displays the status and attributes of the fans in the storage enclosure that are connected to chassis.

  • NOTE: To use this subcommand, you must have the CMC Login User privilege.

Synopsis

racadm raid get fans -o -p Status
                                                racadm raid get fans -o
                                             

Input

  • -o — The -o is used to display the fault-tolerant status of a enclosure.

Example

racadm raid get fans -o -p Status
Fan.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                Fan.Slot.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                
                                             
racadm raid get fans -o
Fan.Slot.0:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 0
                                                Speed                            = 4620 RPMS
                                                Fan.Slot.1:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 1
                                                Speed                            = 4620 RPMS
                                                Fan.Slot.2:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 2
                                                Speed                            = 4490 RPMS
                                                Fan.Slot.3:Enclosure.External.0-1:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 3
                                                Speed                            = 4560 RPMS
                                                Fan.Slot.0:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 0
                                                Speed                            = 4670 RPMS
                                                Fan.Slot.1:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 1
                                                Speed                            = 4670 RPMS
                                                Fan.Slot.2:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 2
                                                Speed                            = 4670 RPMS
                                                Fan.Slot.3:Enclosure.External.0-0:RAID.ChassisSlot.5-1
                                                FanOperationalStatus             = Ok
                                                State                            = Ready
                                                Name                             = Fan 3
                                                Speed                            = 4700 RPMS
                                                
                                             

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\