Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Dell OptiPlex 5270 All-in-One Service Manual

PDF

Installing the microphones

  1. To install the microphone and cable:
    1. Align and place the microphone modules to the slots on the middle frame [1,3].
      NOTE Match the numbers on the microphone modules to the numbers on the middle frame while placing the microphone modules on the middle frame.
    2. Replace the two screws (M2x2.5) that secure the microphone modules to the middle frame [4,2].
      microphone and cable
    3. Route the microphone module cable through the routing guides on the display assembly base [1].
    4. Connect the microphones module cable to the socket on the system board [2].
      microphone and cable
  2. Install the following components:
    1. Speakers
    2. I/O bracket
    3. Base cover
    4. System board shield
    5. Back cover
    6. Stand
  3. Follow the procedure in After working inside your computer.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\