Dell OptiPlex 5270 All-in-One Service Manual

Removing the memory module

1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
   1. Stand
   2. Back cover
3. To locate the memory module on the system board, pry open the DIMM door on the system board shield [1].
4. Pry the retention clips at each end of the memory module slot until the memory module pops up [2].
5. Lift the memory module from the memory module slot [3].
   NOTE Depending on the configuration ordered, your system may have up to two memory modules installed on the system board.