Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell Latitude 3390 2-in-1 Owner's Manual

Removing the speakers

Steps

  1. Follow the procedure in Before working inside your computer.
  2. Remove the:
    1. base cover
    2. battery
    3. LED board
  3. To remove speakers:
    1. Remove the mylar tape that secures the speaker cable on the system board [1].
      NOTE: Lift the latch and release the LED board cable from the laptop, before un-routing the speaker cable.
    2. Disconnect the speaker cable from the connector on the system board [2].
    3. Release the speaker cables from the routing clips on the system board [3].
      The image displays removing the mylar tape and speaker connector
    4. Lift the speakers away from the laptop.
    The image displays lifting the speaker

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\