iDRAC 8/7 v2.70.70.70 RACADM CLI Guide

cfgUserAdmin

This group provides configuration information about the users allowed to access iDRAC through the available remote interfaces.

This group provides configuration information about the users allowed to access CMC through the available remote interfaces.

Up to 16 instances of the user group are allowed. Each instance represents the configuration for an individual user.

NOTE: : In the current CMC firmware version, the objects cfgUserAdminEnable and cfgUserAdminPrivilege are interrelated; changing the value of one property causes the value of the other property to change. For example, if a user does not have login privilege, the user is disabled by default. When you enable the user by changing the value of the UserAdminEnable to 1, the right-most digit of the UserAdminPrivilege also becomes 1. On the other hand, if you change the right-most digit of the UserAdminPrivilege to 0, the value of the UserAdminEnable becomes 0.

Use this object with the config or getconfig subcommands. To use the command as follows: -i <index group>, supply an index group number

To use this object property, you must have the Chassis Configuration Administrator privilege.

NOTE: : You can configure a setting that does not have the hash sign (#) prefixed in the output. To modify a configurable object, use the —o option.

The following sections provide information about the objects in the cfgUserAdmin group.