Skip to main content

iDRAC 8/7 v2.70.70.70 RACADM CLI Guide

PDF

getraclog

Table 1. Details of getraclog attributeThe following table provides details of getraclog attribute:
Description	The getraclog command displays RAC log entries. The getraclog command displays CMC log entries.
Synopsis	racadm getraclog [-i] racadm getraclog [-s <start>] [-c <count>] [--more] racadm getraclog [-c <count>] [-s <start-record>] [--more] NOTE: : If options are not provided, the entire log is displayed.
Input	-c — Specifies the number of records to display. NOTE: : On Local RACADM, the number of logs are restricted to 100 by default. --more — Displays one screen at a time and prompts you to continue (similar to the UNIX more command). -s — Specifies the starting record used for the display. -c — Specifies the number of records to display. NOTE: : On Remote RACADM, the number of logs are restricted to 25 by default. -i — Displays the number of entries in the CMC log. --more — Displays one screen at a time and prompts you to continue (similar to the UNIX more command). -s — Specifies the starting record used for the display. NOTE: : When Enhanced Chassis Logging and Events feature is enabled, then -i and --more options are not displayed.
Output	SeqNumber = 286 Message ID = USR0005 Category = Audit AgentID = RACLOG Severity = Information Timestamp = 2012-10-05 06:25:27 Message = Login failed from processdisco06a: 192.168.0 Message Arg 1 = processdisco06a Message Arg 2 = 10.92.68.245 FQDD = iDRAC.Embedded.1
Example	Display the starting record and the number of records. racadm getraclog -s 10 -c 2 Display a few records and prompt to display another set of records. $ racadm getraclog --more Dec 4 22:23:09 CMC-JP4BF2S Login success from 192.168.0 (username=root, type=SSH, sid=16393) Dec 4 22:24:54 CMC-JP4BF2S Login success from 192.168.0 (username=test, type=SSH, sid=35885) Dec 4 22:26:20 CMC-JP4BF2S Login success from 192.168.0 (username=root, type=GUI, sid=27476) Dec 4 22:28:06 CMC-JP4BF2S Mod password of user puser succeeds Dec 4 22:28:06 CMC-JP4BF2S Mod privileges of user puser succeeds Dec 4 22:28:21 CMC-JP4BF2S Login success from 192.168.0 (username=puser, type=SSH, sid=39229) Dec 4 22:29:12 CMC-JP4BF2S Mod password of user nuser succeeds Dec 4 22:29:12 CMC-JP4BF2S Mod privileges of user nuser succeeds Dec 4 22:29:51 CMC-JP4BF2S SSH login failed (username=nuser, ip=192.168.0, reason=Local user fails to login ) Dec 4 22:30:23 CMC-JP4BF2S last message repeated 3 times Dec 4 22:30:23 CMC-JP4BF2S Mod privileges of user nuser succeeds Dec 4 22:30:38 CMC-JP4BF2S SSH login failed (username=nuser, ip=192.168.0, reason=Local user fails to login ) [more] Entry in the RAC log when Extended Power Performance control is enabled or disabled. racadm getraclog Jul 31 14:16:11 CMC-4C2WXF1 Log Cleared Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Enabled Jul 31 14:15:49 CMC-4C2WXF1 Extended Power Performance is Disabled When Enhanced Logging mode is enabled, the output of getraclog is displayed similar to chassislog output. Using racadm config -g cfgRacTuning -o cfgRacTuneEnhancedLog 1 command, Enhanced Logging feature is enabled. SeqNumber = 38 Message ID = USR8501 Category = Audit AgentID = CMC Severity = Information Timestamp = 2014-10-18 15:48:10 Message Arg 1 = 14503 Message Arg 2 = 48186 Message = Successfully closed Session process: pid=14503 sid=4818
Example	Display the recent 2 records for RAC log racadm getraclog -c 2 SeqNumber = 4102 Message ID = LIC201 Category = Audit AgentID = DE Severity = Warning Timestamp = 2014-06-12 01:38:19 Message = License yPMRJGuEf7z5HG8LO7gh assigned to device iDRAC expires in 4 days. Message Arg 1 = yPMRJGuEf7z5HG8LO7ghMessage Arg 2 = iDRACMessage Arg 3 = 4 ----------------------------------------------------------------------------------- SeqNumber = 4101 Message ID = USR0032 Category = Audit AgentID = RACLOG Severity = Information Timestamp = 2014-06-11 19:54:00 Message = The session for root from 192.168.0 using RACADM is logged off. Message Arg 1 = root Message Arg 2 = 10.94.98.92 Message Arg 3 = RACADM FQDD = iDRAC.Embedded.1 -------------------------------------------------------------------------------------