Skip to main content

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

delete replication-set


Description	Deletes a replication set. This command applies to virtual storage only. You can run this command on the replication set’s primary or secondary system. When you delete a virtual replication set, the internal snapshots created by the system are also deleted. However, no user data is deleted. The primary and secondary volumes can be used like any other base volumes. You cannot delete a virtual replication set if it has a replication in progress. If you want to delete a replication set that has a replication in progress, you must first suspend and then abort replication for that replication set. To view replication activity, use the show replication-sets command. To suspend replication, use the suspend replication-set command. To abort replication, use the abort replication command. This command has a confirmation prompt in interactive console mode.
Minimum role	manage
Syntax	delete replication-set [local-only] `replication-set-ID`
Parameters	local-only Optional. Use this parameter only if you need to remove a replication set from a primary or secondary system when no network connection is available to the peer system and you do not expect to be able to reconnect them. Do not use this parameter in normal operating conditions. Run the command with this parameter on both the primary system and the secondary system to completely remove the replication relationship between the primary and secondary volumes. replication-set-ID The name or serial number of the replication set. A name that includes a space must be enclosed in double quotes.
Examples	Delete replication set RS1. # delete replication-set RS1
See also	abort replication create replication-set resume replication-set set replication-set show replication-sets suspend replication-set