durable-id
|
string
|
Enclosure ID in the format
enclosure_number.
|
enclosure-id
|
uint8
|
Enclosure ID.
|
enclosure-wwn
|
string
|
Enclosure WWN.
|
name
|
string
|
Enclosure name.
|
type
|
string
|
Internal name for the enclosure type.
|
type-numeric
|
uint32
|
Numeric equivalents for
type values.
|
iom-type
|
string
|
I/O module type.
|
iom-type-numeric
|
uint32
|
Numeric equivalents for
iom-type values.
|
platform-type
|
string
|
Hardware
platform type.
|
platform-type-numeric
|
uint32
|
Numeric equivalents for
platform-type values.
|
board-model
|
string
|
Board model.
|
board-model-numeric
|
uint32
|
Numeric equivalents for
board-model values.
|
location
|
string
|
Enclosure location, or blank if not set.
|
rack-number
|
uint8
|
Number of the rack that contains the enclosure.
|
rack-position
|
uint8
|
Position of the enclosure in the rack.
|
number-of-coolings-elements
|
uint8
|
Number of fan units in the enclosure.
|
number-of-disks
|
uint8
|
Number of disk slots (not installed disks) in the enclosure.
|
number-of-power-supplies
|
uint8
|
Number of power supplies in the enclosure.
|
status
|
string
|
Enclosure status.
-
Unsupported
-
OK
-
Critical
-
Warning
-
Unrecoverable
-
Not Installed
-
Unknown
-
Unavailable
|
status-numeric
|
uint32
|
Numeric equivalents for
status values.
-
0: Unsupported
-
1: OK
-
2: Critical
-
3: Warning
-
4: Unrecoverable
-
5: Not Installed
-
6: Unknown
-
7: Unavailable
|
extended-status
|
hex32
|
A numeric value that supplements the standard SES status shown by the status and
status-numeric properties, and represents a specific condition.
-
0x01: IOM A incompatible
-
0x02: IOM B incompatible
|
midplane-serial-number
|
string
|
Midplane serial number.
|
vendor
|
string
|
Enclosure vendor.
|
model
|
string
|
Enclosure model.
|
fru_tlapn
|
string
|
FRU top-level assembly part number.
|
fru-shortname
|
string
|
FRU short description.
|
fru-location
|
string
|
FRU location.
-
MID-PLANE SLOT: Chassis midplane.
- (blank): Not applicable.
|
part-number
|
string
|
FRU part number.
|
mfg-date
|
string
|
Date and time, in the format
year-month-day hour:minutes:seconds(UTC), when a PCBA was programmed or a power supply module was manufactured.
|
mfg-date-numeric
|
uint32
|
Unformatted
mfg-date value.
|
mfg-location
|
string
|
City, state/province, and country where the FRU was manufactured.
|
description
|
string
|
FRU long description.
|
revision
|
string
|
Hardware revision level for the FRU.
|
dash-level
|
string
|
FRU template revision number.
|
emp-a-rev
|
string
|
Firmware revision of controller A’s EMP.
|
emp-b-rev
|
string
|
Firmware revision of controller B’s EMP.
|
rows
|
uint8
|
Number of rows of disk slots.
|
columns
|
uint8
|
Number of columns of disk slots.
|
slots
|
uint8
|
Number of disk slots in this enclosure
|
locator-led
|
string
|
Shows the state of the locator LED on an enclosure.
|
locator-led-numeric
|
uint32
|
Numeric equivalents for
locator-led values.
|
drive-orientation
|
string
|
-
vertical: Disks are oriented vertically.
-
horizontal: Disks are oriented horizontally.
|
drive-orientation-numeric
|
uint32
|
Numeric equivalents for
drive-orientation values.
-
0: vertical
-
1: horizontal
|
enclosure-arrangement
|
string
|
-
vertical: Disks are numbered vertically (by column from top to bottom, proceeding from left to right).
-
horizontal: Disks are numbered horizontally (by row from left to right, proceeding from top to bottom).
|
enclosure-arrangement-numeric
|
uint32
|
Numeric equivalents for
enclosure-arrangement values.
-
0: vertical
-
1: horizontal
|
emp-a-busid
|
string
|
SCSI channel ID of controller A EMP.
|
emp-a-targetid
|
string
|
SCSI target ID of controller A EMP.
|
emp-b-busid
|
string
|
SCSI channel ID of controller B EMP.
|
emp-b-targetid
|
string
|
SCSI target ID of controller B EMP.
|
emp-a
|
string
|
Shows the field name EMP A in console format.
|
emp-a-ch-id-rev
|
string
|
SCSI address and firmware revision of controller A EMP.
|
emp-b
|
string
|
Shows the field name EMP B in console format.
|
emp-b-ch-id-rev
|
string
|
SCSI address and firmware revision of controller B EMP.
|
midplane-type
|
string
|
An abbreviation that describes the enclosure midplane's rack-unit height, maximum number of disks, maximum data rate to disks (Gbit/s), and hardware version.
|
midplane-type-numeric
|
uint32
|
Numeric equivalents for
midplane-type values.
|
midplane-rev
|
uint8
|
Midplane revision number.
|
enclosure-power
|
string
|
Enclosure power in watts.
|
pcie2-capable
|
string
|
-
False: Enclosure is not capable of using PCI Express version 2.
-
True: Enclosure is capable of using PCI Express version 2.
|
pcie2-capable-numeric
|
uint32
|
Numeric equivalents for
pcie2-capable values.
|
health
|
string
|
-
OK
-
Degraded
-
Fault
-
Unknown
-
N/A
|
health-numeric
|
uint32
|
Numeric equivalents for
health values.
-
0: OK
-
1: Degraded
-
2: Fault
-
3: Unknown
-
4: N/A
|
health-reason
|
string
|
If Health is not
OK, the reason for the health state.
|
health-recommendation
|
string
|
If Health is not
OK, the recommended actions to take to resolve the health issue.
|
unhealthy-component
|
Embedded; see
unhealthy-component.
|
drawer
|
Embedded; see
drawers.
|
controllers
|
Embedded; see
controllers,
io-modules.
|
power-supplies
|
Embedded; see
power-supplies.
|
fan-modules
|
Embedded; see
fan-modules.
|
fan-details
|
Embedded; see
fan.
|