Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Baskets

Dell PowerVault ME4 Series Storage System CLI Guide

PDF

io-modules

This basetype is used by show enclosures for an expansion module.

Table 1. io-modules properties
Name Type Description
durable-id string Expansion module ID.
controller-id string
  • A: Controller A.
  • B: Controller B.
controller-id-numeric uint32 Numeric equivalents for controller-id values.
  • 0: B
  • 1: A
name string FRU name.
description string FRU long description.
part-number string FRU part number.
serial-number string FRU serial number.
revision string FRU hardware revision level.
dash-level string FRU template revision number.
fru-shortname string FRU short description.
mfg-date string Date and time, in the format year-month-day hour:minutes:seconds (UTC), when the PCBA of the controller was programmed or a power supply module was manufactured.
mfg-date-numeric uint32 Unformatted mfg-date value.
mfg-location string City, state/province, and country where the FRU was manufactured.
mfg-vendor-id string JEDEC ID of the FRU manufacturer.
position string FRU position, as viewed from the back of the enclosure.
  • Left
  • Right
  • Top
  • Bottom
position-numeric uint32 Numeric equivalents for position values.
  • 0: Left
  • 1: Right
  • 2: Top
  • 3: Bottom
rotation string Rotation of the controller module in the enclosure.
  • 0 Degrees
  • 90 Degrees
  • 180 Degrees
  • 270 Degrees
rotation-numeric string Numeric equivalents for position values.
  • 0: 0 Degrees
  • 1: 90 Degrees
  • 2: 180 Degrees
  • 3: 270 Degrees
configuration-serialnumber string Configuration serial number.
phy-isolation string Shows whether the automatic disabling of SAS expander PHYs having high error counts is enabled or disabled for this controller.
  • Enabled: PHY fault isolation is enabled.
  • Disabled: PHY fault isolation is disabled.
phy-isolation-numeric uint32 Numeric equivalents for phy-isolation values.
  • 0: Enabled
  • 1: Disabled
locator-led string Shows the state of the locator LED on an expansion module.
  • Off
  • On
locator-led-numeric uint32 Numeric equivalents for locator-led values.
  • 0: Off
  • 1: On
status string
  • Operational
  • Down
  • Not installed
  • Unknown
status-numeric uint32 Numeric equivalents for status values.
  • 0: Operational
  • 1: Down
  • 2: Not installed
  • 3: Unknown
health string
  • OK
  • Degraded
  • Fault
  • N/A
  • Unknown
health-numeric uint32 Numeric equivalents for health values.
  • 0: OK
  • 1: Degraded
  • 2: Fault
  • 3: Unknown
  • 4: N/A
health-reason string If Health is not OK, the reason for the health state.
health-recommendation string If Health is not OK, the recommended action to take to resolve the health issue.
unhealthy-component Embedded; see unhealthy-component.
enclosure-id Embedded; see expander-ports.
expander-details Embedded; see expanders.

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\