Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Alienware Area-51m R2 Setup and Specifications

Display

The following table lists the display specifications of your Alienware Area-51m R2.

Table 1. Display specifications

The following table provides the detailed display specifications of Alienware Area-51m R2.

Description Option one Option two Option three
Display type

Full High Definition (FHD)

Full High Definition (FHD)

Ultra High Definition (UHD)

Display-panel technology

Wide-viewing angle (WVA)

Wide-viewing angle (WVA)

Wide-viewing angle (WVA)

Display-panel dimensions (active area):
Height

214.81 mm (8.46 in.)

214.81 mm (8.46 in.)

214.81 mm (8.46 in.)

Width

381.89 mm (15.04 in.)

381.89 mm (15.04 in.)

381.89 mm (15.04 in.)

Diagonal

438.16 mm (17.3 in.)

438.16 mm (17.3 in.)

438.16 mm (17.3 in.)

Display-panel native resolution

1920 x 1080

1920 x 1080

3840 x 2160

Luminance (typical)

300 nits

300 nits

500 nits

Megapixels

2.07

2.07

8.29

Color gamut

72% NTSC

100% sRGB

100% Adobe RGB

Pixels Per Inch (PPI)

127

127

255

Contrast ratio (typ)

600:1

700:1

1200:1

Response time (max)

7 ms (GtG)

3 ms (GtG)

25 ms (Black to White)

Refresh rate

144 Hz

300 Hz

60 Hz

Horizontal view angle

85 +/- degrees

85 +/- degrees

85 +/- degrees

Vertical view angle

85 +/- degrees

85 +/- degrees

85 +/- degrees

Pixel pitch

0.20 mm

0.20 mm

0.10 mm

Power consumption (maximum)

8.67 W

7 W

12 W

Anti-glare vs glossy finish

Anti-glare

Anti-glare

Anti-glare

Touch options

No

No

No


Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\